IP30 Industrial L2+/L4 8-Port 1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Full Ma

Physical Port

• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
• 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
• One RJ45 console interface for basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
• Up to 8 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
• - Total PoE power budget control

• - Per port PoE function enable/disable

• - PoE admin-mode control

• - PoE port power feeding priority

• - Per PoE port power limit

• - PD classification detection
• Intelligent PoE features
• - Temperature threshold control

• - PoE usage threshold control

• - PD alive check

• - PoE schedule

Industrial Case and Installation

• IP30 aluminum case 
• DIN rail and wall-mount design
• 48~56V DC, redundant power with polarity reverse protect function
• Supports 5000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

Digital Input and Digital Output

• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
• - Broadcast/Multicast/Unicast
• Supports VLAN
• - IEEE 802.1Q tagged VLAN

• - Up to 255 VLANs groups, out of 4094 VLAN IDs

• - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 

• - Private VLAN Edge (PVE)

• - Protocol-based VLAN

• - MAC-based VLAN

• - Voice VLAN

• Supports Spanning Tree Protocol
• - IEEE 802.1D Spanning Tree Protocol (STP)

• - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

• - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN

• - BPDU Guard
• Supports Link Aggregation
• - 802.3ad Link Aggregation Control Protocol (LACP)

• - Cisco ether-channel (static trunk)

• - Maximum 6 trunk groups with 4 ports per trunk group

• - Up to 8Gbps bandwidth (duplex mode)

• Provides port mirror (1-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port 
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching) 

Layer 3 IP Routing Features

• Supports maximum 32 static routes and route summarization

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
• - IEEE 802.1p CoS

• - IP TOS/DSCP/IP precedence

• - IP TCP/UDP port number

• - Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking

Multicast

• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• MVR (Multicast VLAN Registration)

Security

• IEEE 802.1x Port-based/MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder

Management

• Switch Management Interfaces
• - Console/Telnet Command Line Interface 

• - Web switch management

• - SNMP v1 and v2c switch management

• - SSH/SSL and SNMP v3 secure access

• Four RMON groups (history, statistics, alarms, and events) 
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via HTTP/TFTP
• DHCP Relay and DHCP Option 82
• User Privilege levels control
• Network Time Protocol (NTP)
• Link Layer Discovery Protocol (LLDP) 
• SFP-DDM (Digital Diagnostic Monitor)
• Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deployment management